Products

The new Meshify 2 is a classic evolved with focus on distinctive design, spacious interior and rugged good looks.

Open and interchangeable
Remove the entire top to build and route with zero hindrance.

Type-C Interface
USB 3.1 Gen 2 Type-C front I/O offers fast-charging and speeds up to 10 Gbps

Nexus+ 2 fan hub
Ultra-slim Nexus+ 2 fan hub connects up to three PWM fans and six 3-pin fans

Versatile Multibracket
Versatile Multibracket that converts any unused fan position to an HDD, SSD or pump mount

Easy cable management
Detachable PSU cable shield and integrated cable guides with velcro straps further simplify cable management behind the board

The new Meshify 2 is a classic evolved with focus on distinctive design, spacious interior and rugged good looks.

Detachable front filter
- New front nylon filter that can be removed for increased airflow
- New front panel design with hinged removable mesh and tether-free bezel for easier access to front fan mounts
- Three Dynamic X2 GP-14 fans come preinstalled with room to expand up to a total of nine fans

Superlative storage
- Convert to Storage Layout and install up to 11 HDDs alongside four dedicated SSDs mounts (6x SSD/HDD trays, 2x SSD brackets and 1x Multibracket included)
- Transformable interior design utilizing a movable wall for enhancing custom builds
- The included Multibracket lets you convert any unused fan position to an HDD, SSD or pump mount
- Tool-less, top-latching side panels allow quick access while preventing accidental drops

Extremely flexible
- Fits your custom water loop with large reservoirs and radiators up to 420 mm in the default Open Layout
- Support for radiators up to 360 mm (front), 420 mm (top) and 280 mm (base)
- Easily holds large motherboards up to and including 285 mm E-ATX

Open and interchangeable
Remove the entire top to build and route with zero hindrance.

Type-C Interface
USB 3.1 Gen 2 Type-C front I/O offers fast-charging and speeds up to 10 Gbps

Nexus+ 2 fan hub
Ultra-slim Nexus+ 2 fan hub connects up to three PWM fans and six 3-pin fans

Versatile Multibracket
Versatile Multibracket that converts any unused fan position to an HDD, SSD or pump mount

Cable management
Detachable PSU cable shield and integrated cable guides with velcro straps further simplify cable management behind the board

The new Meshify 2 is a classic evolved with focus on distinctive design, spacious interior and rugged good looks.

Detachable front filter
- New front nylon filter that can be removed for increased airflow
- New front panel design with hinged removable mesh and tether-free bezel for easier access to front fan mounts
- Three Dynamic X2 GP-14 fans come preinstalled with room to expand up to a total of nine fans

Superlative storage
- Convert to Storage Layout and install up to 11 HDDs alongside four dedicated SSDs mounts (6x SSD/HDD trays, 2x SSD brackets and 1x Multibracket included)
- Transformable interior design utilizing a movable wall for enhancing custom builds
- The included Multibracket lets you convert any unused fan position to an HDD, SSD or pump mount
- Tool-less, top-latching side panels allow quick access while preventing accidental drops

Extremely flexible
- Fits your custom water loop with large reservoirs and radiators up to 420 mm in the default Open Layout
- Support for radiators up to 360 mm (front), 420 mm (top) and 280 mm (base)
- Easily holds large motherboards up to and including 285 mm E-ATX

Open and interchangeable
Remove the entire top to build and route with zero hindrance.

Type-C Interface
USB 3.1 Gen 2 Type-C front I/O offers fast-charging and speeds up to 10 Gbps

Nexus+ 2 fan hub
Ultra-slim Nexus+ 2 fan hub connects up to three PWM fans and six 3-pin fans

Versatile Multibracket
Versatile Multibracket that converts any unused fan position to an HDD, SSD or pump mount

Cable management
Detachable PSU cable shield and integrated cable guides with velcro straps further simplify cable management behind the board

Removable front filter
- New front panel design with hinged removable mesh and tether-free bezel for easier access to front fan mounts
- Easy-to-clean filters on the front, top and base with full PSU coverage and convenient front access
- New front nylon filter that can be removed for increased airflow

Robust cooling
- Install up to 7 fans, front radiators up to 360 mm, or top radiators up to 240 mm
- Open interior layout creates a smooth airflow path from intake to exhaust
- Install up to 7x 120 mm or 4x 140 mm fans (1x 120 mm and 2x 140 mm Dynamic X2 fans included)

Fully featured
- Seamlessly integrated steel panel with steel frame support and bolt-free top-latching mechanism
- Flexible storage options supporting two 2.5”/3.5” drives and up to four SSDs (two SSD brackets included)
- Improved cable routing with three integrated cable alignment clips and six velcro straps

Top priority access
The fully removable top panel opens to provide excellent interior access

Spaciously compact
Clever layout enables the capacity of much larger cases

Type-C interface
USB 3.1 Gen 2 Type-C front I/O offers fast-charging and speeds up to 10 Gbps

Smooth and quiet operation
The sturdy steel drive trays are vibration-damped by cushioning rubber grommets

Full length shroud
A full-length power supply shroud readily conceals the drive cage and excess cabling

Removable front filter
- New front panel design with hinged removable mesh and tether-free bezel for easier access to front fan mounts
- Easy-to-clean filters on the front, top and base with full PSU coverage and convenient front access
- New front nylon filter that can be removed for increased airflow

Robust cooling
- Install up to 7 fans, front radiators up to 360 mm, or top radiators up to 240 mm
- Open interior layout creates a smooth airflow path from intake to exhaust
- Install up to 7x 120 mm or 4x 140 mm fans (1x 120 mm and 2x 140 mm Dynamic X2 fans included)

Fully featured
- Seamlessly integrated steel panel with steel frame support and bolt-free top-latching mechanism
- Flexible storage options supporting two 2.5”/3.5” drives and up to four SSDs (two SSD brackets included)
- Improved cable routing with three integrated cable alignment clips and six velcro straps

Top priority access
The fully removable top panel opens to provide excellent interior access

Spaciously compact
Clever layout enables the capacity of much larger cases

Type-C interface
USB 3.1 Gen 2 Type-C front I/O offers fast-charging and speeds up to 10 Gbps

Smooth and quiet operation
The sturdy steel drive trays are vibration-damped by cushioning rubber grommets

Full length shroud
A full-length power supply shroud readily conceals the drive cage and excess cabling

Removable front filter
- New front panel design with hinged removable mesh and tether-free bezel for easier access to front fan mounts
- Easy-to-clean filters on the front, top and base with full PSU coverage and convenient front access
- New front nylon filter that can be removed for increased airflow

Robust cooling
- Install up to 7 fans, front radiators up to 360 mm, or top radiators up to 240 mm
- Open interior layout creates a smooth airflow path from intake to exhaust
- Install up to 7x 120 mm or 4x 140 mm fans (1x 120 mm and 2x 140 mm Dynamic X2 fans included)

Fully featured
- Seamlessly integrated steel panel with steel frame support and bolt-free top-latching mechanism
- Flexible storage options supporting two 2.5”/3.5” drives and up to four SSDs (two SSD brackets included)
- Improved cable routing with three integrated cable alignment clips and six velcro straps

Top priority access
The fully removable top panel opens to provide excellent interior access

Spaciously compact
Clever layout enables the capacity of much larger cases

Type-C interface
USB 3.1 Gen 2 Type-C front I/O offers fast-charging and speeds up to 10 Gbps

Smooth and quiet operation
The sturdy steel drive trays are vibration-damped by cushioning rubber grommets

Full length shroud
A full-length power supply shroud readily conceals the drive cage and excess cabling

Removable front filter
- New front panel design with hinged removable mesh and tether-free bezel for easier access to front fan mounts
- Easy-to-clean filters on the front, top and base with full PSU coverage and convenient front access
- New front nylon filter that can be removed for increased airflow

Robust cooling
- Install up to 7 fans, front radiators up to 360 mm, or top radiators up to 240 mm
- Open interior layout creates a smooth airflow path from intake to exhaust
- Install up to 7x 120 mm or 4x 140 mm fans (1x 120 mm and 2x 140 mm Dynamic X2 fans included)

Fully featured
- Seamlessly integrated steel panel with steel frame support and bolt-free top-latching mechanism
- Flexible storage options supporting two 2.5”/3.5” drives and up to four SSDs (two SSD brackets included)
- Improved cable routing with three integrated cable alignment clips and six velcro straps

Top priority access
The fully removable top panel opens to provide excellent interior access

Spaciously compact
Clever layout enables the capacity of much larger cases

Type-C interface
USB 3.1 Gen 2 Type-C front I/O offers fast-charging and speeds up to 10 Gbps

Smooth and quiet operation
The sturdy steel drive trays are vibration-damped by cushioning rubber grommets

Full length shroud
A full-length power supply shroud readily conceals the drive cage and excess cabling

Smooth and sturdy
- Iconic angular mesh design offers airflow with a bold, stealth-inspired aesthetic
- Front panel design with hinged removable mesh and tether-free bezel for easier access to front fan mounts
- Robust cooling capacity with seven fan positions and support for up to 360/280 mm radiators

Unobstructed cooling
- Outstanding cooling capacity with either four preinstalled Aspect 12 RGB fans (RGB version) or two preinstalled Aspect 14 fans and one Aspect 12 fan (standard version)
- Open interior layout creates a clear airflow path from front intake to rear exhaust
- Full length power supply shroud with two-part removable cover conceals drive cage and excess cabling for smooth airflow and a clean interior

Flexible front I/O
- Built in RGB controller on the front/top I/O with iconic Fractal Northern Lights effect (RGB version)
- USB Type-C ready front I/O (with accessory sold separately)

Quiet operation
- The sturdy steel drive trays are vibration-damped by cushioning rubber grommets
- Flexible storage options supporting two 2.5”/3.5” drives and up to four SSDs (two SSD brackets included)
- Seven bridgeless expansion slots ensure obstruction-free connections

Bolt-free glass
- Comes with a seamlessly integrated flush tempered and top-latching glass panel
- Easy-to-clean filters on the top and base with full PSU coverage and convenient front access

Smooth and sturdy
- Iconic angular mesh design offers airflow with a bold, stealth-inspired aesthetic
- Front panel design with hinged removable mesh and tether-free bezel for easier access to front fan mounts
- Robust cooling capacity with seven fan positions and support for up to 360/280 mm radiators

Unobstructed cooling
- Outstanding cooling capacity with either four preinstalled Aspect 12 RGB fans (RGB version) or two preinstalled Aspect 14 fans and one Aspect 12 fan (standard version)
- Open interior layout creates a clear airflow path from front intake to rear exhaust
- Full length power supply shroud with two-part removable cover conceals drive cage and excess cabling for smooth airflow and a clean interior

Flexible front I/O
- Built in RGB controller on the front/top I/O with iconic Fractal Northern Lights effect (RGB version)
- USB Type-C ready front I/O (with accessory sold separately)

Quiet operation
- The sturdy steel drive trays are vibration-damped by cushioning rubber grommets
- Flexible storage options supporting two 2.5”/3.5” drives and up to four SSDs (two SSD brackets included)
- Seven bridgeless expansion slots ensure obstruction-free connections

Bolt-free glass
- Comes with a seamlessly integrated flush tempered and top-latching glass panel
- Easy-to-clean filters on the top and base with full PSU coverage and convenient front access

Smooth and sturdy
- Iconic angular mesh design offers airflow with a bold, stealth-inspired aesthetic
- Front panel design with hinged removable mesh and tether-free bezel for easier access to front fan mounts
- Robust cooling capacity with seven fan positions and support for up to 360/280 mm radiators

Unobstructed cooling
- Outstanding cooling capacity with either four preinstalled Aspect 12 RGB fans (RGB version) or two preinstalled Aspect 14 fans and one Aspect 12 fan (standard version)
- Open interior layout creates a clear airflow path from front intake to rear exhaust
- Full length power supply shroud with two-part removable cover conceals drive cage and excess cabling for smooth airflow and a clean interior

Flexible front I/O
- Built in RGB controller on the front/top I/O with iconic Fractal Northern Lights effect (RGB version)
- USB Type-C ready front I/O (with accessory sold separately)

Quiet operation
- The sturdy steel drive trays are vibration-damped by cushioning rubber grommets
- Flexible storage options supporting two 2.5”/3.5” drives and up to four SSDs (two SSD brackets included)
- Seven bridgeless expansion slots ensure obstruction-free connections

Bolt-free glass
- Comes with a seamlessly integrated flush tempered and top-latching glass panel
- Easy-to-clean filters on the top and base with full PSU coverage and convenient front access

Refined airflow
- Repositioned front fan mounting sets a wider stage for light and color
- Install up to 7x 120 mm or 4x 140 mm fans (4x 120 mm Aspect 12 RGB PWM fans included)
- Open interior layout creates a smooth airflow path from front intake to rear exhaust

Detachable front filter
- Iconic angular mesh design provides filtered airflow with a bold, stealth-inspired aesthetic
- Front nylon filter that can be removed for increased airflow
- Easy-to-clean high airflow nylon filters on the front, top and base with full PSU coverage and convenient front access

Light and color
Comes with 4x Aspect 12 RGB PWM fans pre-installed

Extremely flexible
- Room for GPUs up to 360 mm with a 240 mm radiator in the top, or up to 360/280 mm front radiators with GPUs under 305 mm
- Full length power supply shroud with two-part removable cover conceals drive cage and excess cabling for smooth airflow and a clean interior
- Chassis opens up to fully expose the case interior on three sides for totally unhindered installation and cable routing

Type-C Interface
- Three front USB ports including one USB 3.1 Gen 2 Type-C with fast charging support and speeds up to 10Gbps
- Built in RGB controller on the front/top I/O with iconic Fractal Northern Lights effect

Bolt-free glass
- Seamlessly integrated tempered glass panel with steel frame support and bolt-free top-latching mechanism
- Flexible storage options supporting two 2.5”/3.5” drives and up to four SSDs (two SSD brackets included)
- Seven bridgeless expansion slots ensure obstruction-free connections

Top priority access
Fully removable top panel and top fan bracket opens to provide excellent interior access and easy cable routing

Removable front filter
- New front panel design with hinged removable mesh and tether-free bezel for easier access to front fan mounts
- Easy-to-clean filters on the front, top and base with full PSU coverage and convenient front access
- New front nylon filter that can be removed for increased airflow

Robust cooling
- Install up to 7 fans, front radiators up to 360 mm, or top radiators up to 240 mm
- Open interior layout creates a smooth airflow path from intake to exhaust
- Install up to 7x 120 mm or 4x 140 mm fans (1x 120 mm and 2x 140 mm Dynamic X2 fans included)

Fully featured
- Seamlessly integrated steel panel with steel frame support and bolt-free top-latching mechanism
- Flexible storage options supporting two 2.5”/3.5” drives and up to four SSDs (two SSD brackets included)
- Improved cable routing with three integrated cable alignment clips and six velcro straps

Top priority access
The fully removable top panel opens to provide excellent interior access

Spaciously compact
Clever layout enables the capacity of much larger cases

Type-C interface
USB 3.1 Gen 2 Type-C front I/O offers fast-charging and speeds up to 10 Gbps

Smooth and quiet operation
The sturdy steel drive trays are vibration-damped by cushioning rubber grommets

Full length shroud
A full-length power supply shroud readily conceals the drive cage and excess cabling

The Meshify 2 Lite is a high-performance case with a bold, stealth-inspired aesthetic. Its striking exterior features bolt-free, flush tempered glass, a front with a hinged, iconic mesh panel, and a spacious interior that supports multi-radiator setups.

Smooth and sturdy
- Iconic angular mesh design offers airflow with a bold, stealth-inspired aesthetic
- Front panel design with hinged removable mesh and tether-free bezel for easier access to front fan mounts
- Outstanding cooling capacity with a total of nine 120/140 mm fan mounts and either four preinstalled Aspect 14 RGB fans (RGB version) or three preinstalled Aspect 14 fans (standard version)

Generous space
- Spacious interior easily accommodates large motherboards up to and including 285 mm E-ATX
- Support for radiators up to 360 mm in front, 360 mm up top, or 280 mm in the base
- Ventilated PSU shroud with two-part removable cover for optimal cable concealment and front radiator support

More in store
- Built in RGB controller on the front/top I/O with iconic Fractal Northern Lights effect (RGB version)
- Tool-less, top-latching side panels allow quick access while preventing accidental drops
- Includes 2 HDD/SSD trays and 2 SSD brackets for mounting up to 4 drives

Easier front access
- I/O connections are separated from the redesigned front panel to simplify installation and modding
- USB Type-C ready with the Model E accessory cable (sold separately)
- Expandable using Multibrackets, trays and cages sold separately

The Meshify 2 Lite is a high-performance case with a bold, stealth-inspired aesthetic. Its striking exterior features bolt-free, flush tempered glass, a front with a hinged, iconic mesh panel, and a spacious interior that supports multi-radiator setups.

Smooth and sturdy
- Iconic angular mesh design offers airflow with a bold, stealth-inspired aesthetic
- Front panel design with hinged removable mesh and tether-free bezel for easier access to front fan mounts
- Outstanding cooling capacity with a total of nine 120/140 mm fan mounts and either four preinstalled Aspect 14 RGB fans (RGB version) or three preinstalled Aspect 14 fans (standard version)

Generous space
- Spacious interior easily accommodates large motherboards up to and including 285 mm E-ATX
- Support for radiators up to 360 mm in front, 360 mm up top, or 280 mm in the base
- Ventilated PSU shroud with two-part removable cover for optimal cable concealment and front radiator support

More in store
- Built in RGB controller on the front/top I/O with iconic Fractal Northern Lights effect (RGB version)
- Tool-less, top-latching side panels allow quick access while preventing accidental drops
- Includes 2 HDD/SSD trays and 2 SSD brackets for mounting up to 4 drives

Easier front access
- I/O connections are separated from the redesigned front panel to simplify installation and modding
- USB Type-C ready with the Model E accessory cable (sold separately)
- Expandable using Multibrackets, trays and cages sold separately

The Meshify 2 Lite is a high-performance case with a bold, stealth-inspired aesthetic. Its striking exterior features bolt-free, flush tempered glass, a front with a hinged, iconic mesh panel, and a spacious interior that supports multi-radiator setups.

Smooth and sturdy
- Iconic angular mesh design offers airflow with a bold, stealth-inspired aesthetic
- Front panel design with hinged removable mesh and tether-free bezel for easier access to front fan mounts
- Outstanding cooling capacity with a total of nine 120/140 mm fan mounts and either four preinstalled Aspect 14 RGB fans (RGB version) or three preinstalled Aspect 14 fans (standard version)

Generous space
- Spacious interior easily accommodates large motherboards up to and including 285 mm E-ATX
- Support for radiators up to 360 mm in front, 360 mm up top, or 280 mm in the base
- Ventilated PSU shroud with two-part removable cover for optimal cable concealment and front radiator support

More in store
- Built in RGB controller on the front/top I/O with iconic Fractal Northern Lights effect (RGB version)
- Tool-less, top-latching side panels allow quick access while preventing accidental drops
- Includes 2 HDD/SSD trays and 2 SSD brackets for mounting up to 4 drives

Easier front access
- I/O connections are separated from the redesigned front panel to simplify installation and modding
- USB Type-C ready with the Model E accessory cable (sold separately)
- Expandable using Multibrackets, trays and cages sold separately

Slick and streamlined
- Compact yet roomy interior makes the most of mATX with high space efficiency and robust component support
- Room for GPUs up to 306 mm long including front fans with 331 mm total space
- Ventilated PSU shroud with two-part removable cover for optimal cable concealment and front radiator support

Detachable front filter
- Front panel design with hinged removable mesh filter and tether-free bezel for easier access to front fan mounts
- Double layered front filter with detachable nylon for increased airflow

Refined airflow
- The open interior layout creates a smooth airflow path from intake to rear exhaust
- Install up to 7x 120 mm or 4x 140 mm fans (1x 120 mm and 1x 140 mm Dynamic X2 GP fans included)

Bolt-free glass
Seamless, top-latching tempered glass panels make for a stylish exterior

All access
- The fully removable top panel and fan bracket offers excellent interior access and easy cable routing
- Easy-to-clean filters on the front, top and base with full PSU coverage and convenient front access

More in store
- Flexible storage options with two HDD/SSD drive trays and four dedicated SSD mounts (2 brackets included)
- Integrated cable guides with cable straps further simplify cable management behind the board

Type-C Interface
USB Type-C front I/O offers quick access to fast charging and speeds up to 10 Gbps

Robust cooling
- Pre-installed Dynamic X2 GP 1x 120 mm and 1x 140 mm fans ensure smooth airflow with minimal noise
- Install up to 6x 120 mm or 3x 140 mm fans and front radiators up to 280 mm
- Room for GPUs up to 306 mm long including front fans with 331 mm total space

All access
- Fully removable top panel and a top fan bracket that opens to provide excellent interior access and easy cable routing
- Easy-to-clean filters on the front, top and base with full PSU coverage and convenient front access
- Front filter with double layered detachable nylon for increased airflow

Slick and streamlined
The open interior layout creates a smooth airflow path from intake to rear exhaust

Guided airflow
- Two-part modular air duct for increased GPU airflow
- Bridgeless PCI expansion slots ensure unrestricted GPU exhaust

More in store
- Flexible storage option supporting one 3.5” drive and three 2.5’’ drives
- Integrated cable guides with cable straps further simplify cable management behind the board

Bolt-free glass
- Seamlessly integrated TG panel with steel frame support and bolt-free top-latching mechanism
- Front panel design with hinged removable mesh and tether-free bezel for easier access to front fan mounts

Type-C interface
USB-C front I/O offers quick access to fast charging and speeds up to 10 Gbps

Robust cooling
- Pre-installed Dynamic X2 GP 1x 120 mm and 1x 140 mm fans ensure smooth airflow with minimal noise
- Install up to 6x 120 mm or 3x 140 mm fans and front radiators up to 280 mm
- Room for GPUs up to 306 mm long including front fans with 331 mm total space

All access
- Fully removable top panel and a top fan bracket that opens to provide excellent interior access and easy cable routing
- Easy-to-clean filters on the front, top and base with full PSU coverage and convenient front access
- Front filter with double layered detachable nylon for increased airflow

Slick and streamlined
The open interior layout creates a smooth airflow path from intake to rear exhaust

Guided airflow
- Two-part modular air duct for increased GPU airflow
- Bridgeless PCI expansion slots ensure unrestricted GPU exhaust

More in store
- Flexible storage option supporting one 3.5” drive and three 2.5’’ drives
- Integrated cable guides with cable straps further simplify cable management behind the board

Bolt-free glass
- Seamlessly integrated TG panel with steel frame support and bolt-free top-latching mechanism
- Front panel design with hinged removable mesh and tether-free bezel for easier access to front fan mounts

Type-C interface
USB-C front I/O offers quick access to fast charging and speeds up to 10 Gbps

The Meshify 2 RGB is a high-performance case with a bold, stealth-inspired aesthetic. Its striking exterior features bolt-free, flush tempered glass, a fully removable top granting excellent interior access, and a front with USB-C, hinged mesh panel and removable nylon filter. The flexible dual-layout interior supports large storage arrays and multi-radiator setups that makes cooling a breeze.

Refined airflow
- Outstanding cooling capacity with a total of nine 120/140 mm fan mounts and four preinstalled Aspect 14 RGB PWM fans
- Repositioned front fan mounting sets a wider stage for light and color
- Iconic angular mesh design provides filtered airflow with a bold, stealth-inspired aesthetic

Detachable front filter
- Hinged removable mesh front panel and tether-free bezel for easier access to front fan mounts
- Front nylon filter that can be removed for increased airflow
- Easy-to-clean high airflow nylon filters on the front, top and base with full PSU coverage and convenient front access

Light and color
Comes with 4x Aspect 14 RGB PWM fans pre-installed

Superlative storage
- Convert to Storage Layout and install up to 11 HDDs alongside four dedicated SSDs mounts (6x SSD/HDD trays, 2x SSD brackets and 1x Multibracket included)
- Transformable interior design utilizing a movable wall for enhancing custom builds
- The included Multibracket lets you convert any unused fan position to an HDD, SSD or pump mount
- Tool-less, top-latching side panels allow quick access while preventing accidental drops

Extremely flexible
- Support for radiators up to 360 mm in front, 360 mm up top, or 280 mm in the base in the default Open Layout
- Easily holds large motherboards up to and including 285 mm E-ATX
- Ventilated PSU shroud with two-part removable cover for optimal cable concealment and front radiator support
- Chassis opens up to fully expose the case interior on three sides for totally unhindered installation and cable routing

Type-C Interface
- Three front USB ports including one USB 3.1 Gen 2 Type-C with fast charging support and speeds up to 10Gbps
- Built in RGB controller on the front/top I/O with iconic Fractal Northern Lights effect

Nexus+ 2 fan hub
Ultra-slim Nexus+ 2 fan hub connects up to three PWM fans and six 3-pin fans

Versatile Multibracket
Versatile Multibracket that converts any unused fan position to an HDD, SSD or pump mount

Cable management
Detachable PSU cable shield and integrated cable guides with velcro straps further simplify cable management behind the board

The Meshify 2 RGB is a high-performance case with a bold, stealth-inspired aesthetic. Its striking exterior features bolt-free, flush tempered glass, a fully removable top granting excellent interior access, and a front with USB-C, hinged mesh panel and removable nylon filter. The flexible dual-layout interior supports large storage arrays and multi-radiator setups that makes cooling a breeze.

Refined airflow
- Outstanding cooling capacity with a total of nine 120/140 mm fan mounts and four preinstalled Aspect 14 RGB PWM fans
- Repositioned front fan mounting sets a wider stage for light and color
- Iconic angular mesh design provides filtered airflow with a bold, stealth-inspired aesthetic

Detachable front filter
- Hinged removable mesh front panel and tether-free bezel for easier access to front fan mounts
- Front nylon filter that can be removed for increased airflow
- Easy-to-clean high airflow nylon filters on the front, top and base with full PSU coverage and convenient front access

Light and color
Comes with 4x Aspect 14 RGB PWM fans pre-installed

Superlative storage
- Convert to Storage Layout and install up to 11 HDDs alongside four dedicated SSDs mounts (6x SSD/HDD trays, 2x SSD brackets and 1x Multibracket included)
- Transformable interior design utilizing a movable wall for enhancing custom builds
- The included Multibracket lets you convert any unused fan position to an HDD, SSD or pump mount
- Tool-less, top-latching side panels allow quick access while preventing accidental drops

Extremely flexible
- Support for radiators up to 360 mm in front, 360 mm up top, or 280 mm in the base in the default Open Layout
- Easily holds large motherboards up to and including 285 mm E-ATX
- Ventilated PSU shroud with two-part removable cover for optimal cable concealment and front radiator support
- Chassis opens up to fully expose the case interior on three sides for totally unhindered installation and cable routing

Type-C Interface
- Three front USB ports including one USB 3.1 Gen 2 Type-C with fast charging support and speeds up to 10Gbps
- Built in RGB controller on the front/top I/O with iconic Fractal Northern Lights effect

Nexus+ 2 fan hub
Ultra-slim Nexus+ 2 fan hub connects up to three PWM fans and six 3-pin fans

Versatile Multibracket
Versatile Multibracket that converts any unused fan position to an HDD, SSD or pump mount

Cable management
Detachable PSU cable shield and integrated cable guides with velcro straps further simplify cable management behind the board

Bigger, bolder and better? With more of everything, the Meshify 2 XL is ready to take on your most ambitious builds.

Detachable front filter
- The nylon filter is easily removed from the hinged mesh panel for increased airflow
- Tether-free bezel for easier access to front fan mounts
- Three pre-installed Dynamic X2 GP-14 fans and room for more (max 9x 140 mm / 11x 120 mm)

Superlative storage
- Optional accessories allow expansion up to 18 HDDs and 5 SSDs in Storage Layout
- The included Multibrackets lets you convert any unused fan positions to HDD, SSD or pump mounts
- Tool-less, top-latching panels allow quick access while preventing accidental drops

Flexible dual-layout design
- Convert to Open Layout and get more than enough room for your custom water loop with large reservoirs and radiators up to 480 mm
- Support for radiators up to 480/420 mm (front), 480/420 mm (top) and 280/240 mm (base)
- An expansive internal layout easily accommodates large motherboards up to E-ATX and SSI-EEB

Open and interchangeable
Remove the entire top to build and route with zero hindrance.

Type-C interface
USB 3.1 Gen 2 Type-C front I/O offers fast-charging and speeds up to 10Gbps

Nexus+ 2 fan hub
Ultra-slim Nexus+ 2 fan hub connects 3x PWM fans and 6x 3-pin fans

Versatile multibrackets
The included Multibrackets lets you convert unused fan positions to HDD, SSD or pump mounts

Easy cable management
Detachable PSU cable shield and integrated cable guides with velcro straps further simplify cable management behind the board